Mindquest – Mission Control Centre Podcast

Huge thanks to the folks over at the http://www.mindquest.io Mission Control Centre Podcast for having me on their show this week. On Learning Azure IoT and Being an Active Member of the Community Listen to the interview 🔊 https://bit.ly/2WYEq69Read the full article 📲 https://bit.ly/3yqoB66

Jonnychipz – In Conversation with Clifford Agius

Join John Lunn aka Jonnychipz as he is joined by Airline Pilot, .NET / Maui Dev, MVP and all around IoT expert Mr Clifford Agius. This episode of Jonnychipz In Conversation with' will be released on Azureish Live (www.twitch.tv/azureishlive) and its a great episode that you can't miss! Join us at 6.30pm (BST) on Friday …

Continue reading Jonnychipz – In Conversation with Clifford Agius

AZ-220 Microsoft Azure IoT Developer Exam Prep

So the next Microsoft exam in your sights is AZ-220? Me to! I was fortunate enough to sit this exam in April 2021 just before the skills measured changed, so this article is based on the exam I sat. You may want to have a look at the exam skills measured to see what has …

Continue reading AZ-220 Microsoft Azure IoT Developer Exam Prep

Azure IoT Edge – Securing your Devices

How do you make sure your Azure Edge devices are secure and cannot be tampered with? This is the job of the Azure IoT Edge Security Manager. More information can be found here: https://docs.microsoft.com/en-us/azure/iot-edge/iot-edge-security-manager?view=iotedge-2018-06 The key principals of the Security Manager is that it protects all of the Edge components and devices by abstracting the …

Continue reading Azure IoT Edge – Securing your Devices

Using Docker to Containerise a Blazor Web Assembly (WASM) App for a 3D Printed Robot Arm running on a Raspberry Pi!

Hey everyone, thanks for clicking on this link, I tried to go for the longest title I could! But stay with me on this one! There is a lot to take in! I really should have blogged about this in smaller batches as progressed, but I didn't so this is going to be a bumper …

Continue reading Using Docker to Containerise a Blazor Web Assembly (WASM) App for a 3D Printed Robot Arm running on a Raspberry Pi!

In Conversation with… Peter Gallagher

In this episode I am joined by the amazing Peter Gallagher, Author, Speaker, Programmer, MVP and MCT. We talk IoT and the democratisation and how the barriers to entry for learning have fallen over the years and how you can get up and running with IoT within minutes! Peter guides us all through some amazing …

Continue reading In Conversation with… Peter Gallagher

Day[98/100] #100DaysOfCloud – Jonnychipz – Introduction to Azure IoT

Being quite aware that I am in the closing few days of my 100 Days of Cloud challenge, however clearly the learnings do not stop. I spent some time today covering off the wider IoT content on the MS Learn website, with a view at some point of taking the speciality exam AZ-220. As some …

Continue reading Day[98/100] #100DaysOfCloud – Jonnychipz – Introduction to Azure IoT

Day[57/100] #100DaysOfCloud – Jonnychipz – Azure IoT Hub Upload Data and interacting with LED on Raspberry Pi!

Ok, so following on from yesterdays post about getting my Raspberry Pi up and running and doing something simple like flashing an LED, I thought today I would look at taking this a stage further and integrate this will uploading some data into Azure IoT Hub. The idea with this post is to show how …

Continue reading Day[57/100] #100DaysOfCloud – Jonnychipz – Azure IoT Hub Upload Data and interacting with LED on Raspberry Pi!

Day[56/100] #100DaysOfCloud – Jonnychipz – Making an LED Blink with Raspberry Pi, Python and Remote SSH

Hey all, ok so today I thought I would break out the Raspberry Pi and my IoT sensor kit and breadboard. I'm starting to delve into configuring my own sensors and electronics to help me learn Python as well as look into how I can create an Azure IOT Hub and send/receive signals using Azure …

Continue reading Day[56/100] #100DaysOfCloud – Jonnychipz – Making an LED Blink with Raspberry Pi, Python and Remote SSH